Description

INSTALLATION INSTRUCTIONS

PowerFlow Aircleaner

     

 

INSTALLATION INSTRUCTIONS

 

1. Gain access to the engine compartment.
2. Unclip the 3 tension clips to open the airbox lid and remove the stock filter.
3. Install the new Breathless Performance Powerflow filter
4. Push the 3 clips back in place.
5. You are done!!!

 

 

Remember this is a cleanable filter, you can use our cleaning solution or use the K&N cleaning solution.

 

Next Mod called the .50 cent fix: To remove the silencer box from the airbox.

This mod will give you a little more sound plus you will be able to increase the airflow to the engine, thus even more power!!

 

1. First you should remove your stock airbox assembly and place on a table or work bench.
2. You will need to cut the 2 plastic tubes to separate the silencer from the airbox. See pic.
3. Now you need to cap off the holes with a quarter in each. It is the perfect fit and seal it around with silicone adhesive or JB weld. That is a .50 cent fix..
4. Once dry reinstall your stock airbox with the new powerFlow filter.

 

 If you have any questions please call 954-925-7725

2070-F Tigertail Blvd

Building 2

Dania, Fl 33004